Mechanisms With Ptc Creo Ptc Creo Showcase Youtube To create a new reference dimension. 1. click sketch > reference and select the entities to define the dimension. 2. middle click to place the dimension. 1. define the active annotation orientation before creating the first annotation in any session. 2. click annotate > dimension. the select reference dialog box opens. select select a surface. 3. select two surfaces to measure the distance or angle between them. after you select the second surface, creo parametric creates and places the.
Drawing Environment In Ptc Creo Parametric Part 1 Projections Background music:music | "to the moon" by liqwydwatch: • liqwyd to the moon [official] license: liqwydmusic how to usedownload stream:. 1. if you clicked radius or diameter, click a circle, arc, or fillet. 2. if you clicked arc, click the length or the angle check box to dimension the length or the angle of the arc. click the two end points on an arc. right click the viewport, select length or angle dimension from the context menu. 1. find the first dimension that was created and right click, choose "toggle ordinate linear". (only the first dimension created will have this option). 2. right click on the now linear dimension and select "edit attachment". re attach dimension. 3. right click and select "toggle ordinate linear". To add or modify a dimension. 1. select one or two entities as references and then click design > dimension. a default dimension appears. 2. to select a different dimension option, right click and choose one from the shortcut menu. 3. to remove a selected reference, hold down the ctrl key and reselect the reference. 4.
How To Get Varied Items Dimension In Creo Toolkit Ptc Community 1. find the first dimension that was created and right click, choose "toggle ordinate linear". (only the first dimension created will have this option). 2. right click on the now linear dimension and select "edit attachment". re attach dimension. 3. right click and select "toggle ordinate linear". To add or modify a dimension. 1. select one or two entities as references and then click design > dimension. a default dimension appears. 2. to select a different dimension option, right click and choose one from the shortcut menu. 3. to remove a selected reference, hold down the ctrl key and reselect the reference. 4. Place both parts in an assembly. create a new parameter in the assemble (you can use the same name) then go to the relations and create 2 relations. the first one copies the diameter value to the cylinder, the second one will copy the diameter to the piston. from now on, both diameters are related to eachother. 1. click 3d documentation and then, in the annotate group, click angular. the create angle dim dialog box opens. 2. if necessary, specify whether you want to create a generic dimension or gd&t by clicking the appropriate tab. 3. select the references for the dimension: generic: click two references defining the angle.
Example Some Reference Dimensions Place both parts in an assembly. create a new parameter in the assemble (you can use the same name) then go to the relations and create 2 relations. the first one copies the diameter value to the cylinder, the second one will copy the diameter to the piston. from now on, both diameters are related to eachother. 1. click 3d documentation and then, in the annotate group, click angular. the create angle dim dialog box opens. 2. if necessary, specify whether you want to create a generic dimension or gd&t by clicking the appropriate tab. 3. select the references for the dimension: generic: click two references defining the angle.
How To Edit Change Dimensions In Drawing Ptc Creo 7 Beginner
Comments are closed.