Chevy Impala Power Steering Cooler Line Replacement Youtube The new gates 365509 power steering cooler return line kit, a whopping $18 from amazon. the cooler mounts under the bottom radiator shroud and bumper cover. before removing the return hose at pump, i removed one of the crimp connectors on the cooler hose and separated to try and drain as much fluid as possible. How to: remove front bumper and remove power steering cooler. remove the grill assembly. it just pulls right off, on bolts or screws. next, there is two bolts, and a plastic clip on top of the bumper cover. unscrew the bolts and pry loose the plastic clip (the center prys up and it lifts out). on the under side of the center of the bumper there.
Power Steering Cooling Line Compatible With 2012 2013 Chevy Impala My daughter's trailblazer sprung a massive leak in the power steering cooler. time to swap it out! it's easier than it seems (or looks in this video!!).pro. The power steering cooler was compromised on this chevy impala lt. the right front suspension and steering system needed to be moved and the pump was replac. 732 posts · joined 2012. #2 · aug 2, 2013. i don't know your truck but it should be pretty easy if it's an air cooler mounted in front of the radiator. hardest thing maybe removing front grill and front bumper. the cooler is on the return side of the power steering system so you don't have to worry about pressure. you can use regular 3 8. Cut the line just enough to put a screw driver in to break it (search for power steering line and tranny line fix). you can see how to cut the crimp clamps off. here is the cut line. once the clamp is off you will lose about an ounce of fluid. now slide the hose with the plastic hanger on it from the cooler into the hard line.
Power Steering Cooling Line Compatible With 1995 2006 2015 Chevy 732 posts · joined 2012. #2 · aug 2, 2013. i don't know your truck but it should be pretty easy if it's an air cooler mounted in front of the radiator. hardest thing maybe removing front grill and front bumper. the cooler is on the return side of the power steering system so you don't have to worry about pressure. you can use regular 3 8. Cut the line just enough to put a screw driver in to break it (search for power steering line and tranny line fix). you can see how to cut the crimp clamps off. here is the cut line. once the clamp is off you will lose about an ounce of fluid. now slide the hose with the plastic hanger on it from the cooler into the hard line. However i was told the power steering cooler lines aren't made anymore and they'd have to fabricate one and spend a bit of time taking apart the front end to access it. $300 including oil change and new hose clamp. or, i bypass the power steering cooler and just not use it. $150 to go that route, including oil change and clamp. This cooler unit is made the same as the stock cooler and works to keep power steering fluid temperature levels down to help prolong the lifespan of the power steering system overall.application. this replacement cooler is built to install on 2005 2006 chevy silverado 1500 trucks with 4.8l, 5.3l, and 6.0l engines.
918 301 Dorman Power Steering Cooling Line New For Chevy Avalanche However i was told the power steering cooler lines aren't made anymore and they'd have to fabricate one and spend a bit of time taking apart the front end to access it. $300 including oil change and new hose clamp. or, i bypass the power steering cooler and just not use it. $150 to go that route, including oil change and clamp. This cooler unit is made the same as the stock cooler and works to keep power steering fluid temperature levels down to help prolong the lifespan of the power steering system overall.application. this replacement cooler is built to install on 2005 2006 chevy silverado 1500 trucks with 4.8l, 5.3l, and 6.0l engines.
How To Replace Power Steering Cooler On Chevy Silverado Youtube
Comments are closed.