Main Steps To Replace A Radiator In Your Jeep Grand Cherokee Then, remove the hose clamp that’s connecting the overflow reservoir tank (the long tube) and let all of the fluid flow out. step 3: then, remove the clips to take off the grill. next, remove some bolts and take off the crossbar. then, remove the bolts that attach the radiator to your jeep’s frame. make sure you have a good grip on each. In this video i’ll be replacing my radiator in my grand cherokee showing a short cut how to , for those who don’t want to spend unnecessary money at the d.
Main Steps To Replace A Radiator In Your Jeep Grand Cherokee Step 2 – drain radiator from coolant. open the radiator's cap located on top of the radiator, and locate the drain plug on the bottom of it by the passenger's side. place a container under the drain plug and remove it by turning counterclockwise. let the coolant drain completely. figure 3. With the water pump fully assembled, we still need to get the radiator in. slip the radiator in place. line up the a c condenser with the radiator and reinstall. make sure to clip the transmission cooler lines back in place. reinstall the radiator shroud and hood latch. reinstall the front grille onto the shroud. Here is how to replace the radiator on a 2014 jeep grand cherokee with a 3.6l v6. i went with the front bumper removal method. linked video on that. Step 2. remove the upper radiator hose and lower radiator hose. inspect the hoses, and if they need to be replace, this is the perfect time to do it. unfasten all of the bolts with a wrench, securing the grill reinforcement panel, and take off the panel.
Comments are closed.