How To Diy Radiator Removal Installation On 2000 Wj Grand Move the a c tank off to the side. next there will be 2 10mm screws that you will need to undo from the radiator so you can move it around and also disconnect the top radiator hose from radiator. now take your 7 8 open end wrench and take off the transmission cooler lines from the radiator. Re installation: 11) carefully reinstall the radiator auxiliary cooler condenser shroud assembly into the jeep. a. make sure to line up the rubber alignment dowels into the lower radiator support. 12) reinstall the upper radiator hose and clamp at both ends. 13) reinstall the reservoir hose to radiator filler neck.
How To Diy Radiator Removal Installation On 2000 Wj Grand John warns us, this is not for newbies or the faint of heart. this is a fairly big job: lots of nuts, bolts, tubing, etc., to disconnect and picking up the r. Jeep grand cherokee 4.7 radiator. A how to video on installing your 4.7 jeep grand cherokee radiator, this installation video will show you step by step everthing you need to know so enjoy. Step 2 – drain radiator from coolant. open the radiator's cap located on top of the radiator, and locate the drain plug on the bottom of it by the passenger's side. place a container under the drain plug and remove it by turning counterclockwise. let the coolant drain completely. figure 3.
Comments are closed.