How To Check And Fill Coolant 08 19 Ford F 350 Youtube Open your hood and locate your radiator and coolant reservoir. some older vehicles don’t include a reservoir, but most modern vehicles have a small tank for filling and checking the coolant level. the reservoir should be clear plastic, so you can easily see the level of coolant and the maximum fill line. 3. check the radiator fluid level by looking at the “fill” line. coolant systems don’t normally have a lot of extra room at the top, so the fluid levels should be near the top. if the fluid is more than a few inches from the cap, it’s probably low. look for the “full” or “fill” line etched into the radiator metal.
Hyundai Myhyundai How To Check And Fill Coolant Youtube 1. inspect the surface of the coolant for signs of an oil leak. look for an oily film on the surface on the coolant. coolant can come in a variety of colors, including red, green, blue, and yellow. however, if the surface is dark or has an oily foam on the surface it may mean that there is a leak in your head gasket. Turn your engine off and let it cool down for 15 minutes, then pop the hood and locate the coolant reservoir near the engine. uncap the coolant reservoir and use a funnel to add coolant to the reservoir up to the “max” or “fill line” indicators on the side. replace the coolant cap and let the car idle for 5 minutes while you check the. Step 2: pop the hood and locate the radiator cap. open your car’s hood. almost all cars have their radiators located under the hood. once the hood is opened, look to the front of the engine bay. Test the coolant. set your multimeter to dc volts to less than (<) 20 volts. touch the black lead to the negative battery lead or the chassis ground, and place the red lead into the coolant. if the reading is less than .4 volts, the coolant is in good shape. anything over that indicates the anti corrosive properties of the antifreeze have.
Comments are closed.