How To Burp Cooling System Subaru Wrx Sti Youtube How to burp your cooling system. if you do work in your cooling system that requires you to drain your coolant, you have to purge the system of air or “burp”. 1) fill the coolant resevoir (plastic bottle) to the fill line (put cap on) 2) fill the turbo coolant reevoir (small metal right in front of turbo) (put cap on) 3) start car and turn on heater (high) 4) hold rpm's at 3000 for 10 minutes ( even if temp = h) 5) turn engine off and leave key to acc (keep heater on).
How To Bleed The Coolant System On A Subaru Impreza Wrx Sti How To Just put this funnel where you fill the coolant and fill it half way with coolant of your choice. with the car running un plug the funnel and let the burping begin it takes about 15 min or so depending on how much air is in the system. you will see the funnel drain and fill also depending on the amount of air in the system. Fill up the radiator with distilled water and run the engine. turn off the engine and drain the water, fill up the radiator with antifreeze until you have a 50 50 coolant distilled water mixture and burp the system. like the oil in your wrx sti, coolant gets dirty over time and loses its ability to cool down your 2.5 liter engine. This is a common problem why subaru wrxs overheat. if you don’t get all the air out of your coolant system your car will overheat. check it out how to burp y. In this episode, we teach you how to use a spill proof funnel to bleed your subaru's cooling system. the spill proof funnel is a cool tool that everyone shou.
Subaru Cooling System Burping Getting Air Out Youtube This is a common problem why subaru wrxs overheat. if you don’t get all the air out of your coolant system your car will overheat. check it out how to burp y. In this episode, we teach you how to use a spill proof funnel to bleed your subaru's cooling system. the spill proof funnel is a cool tool that everyone shou. Turn off the engine and drain the water, fill up the radiator with antifreeze until you have a 50 50 coolant distilled water mixture and burp the system. like the oil in your impreza, coolant gets dirty over time and loses its ability to cool down your 2.5 liter engine. when you flush your coolant, which is antifreeze, on your 2008, you are. Put the cap on the radiator. fill the overflow reservoir to the full line. install a nice funnel into the turbo reservoir. i use a lisle funnel made specifically for this task. fill the turbo reservoir until it wont accept any more fluid. turn the heater on to its highest setting and turn on the fan as well.
Comments are closed.