Gm 3100 3400 3500 Engine Coolant Temp Sensor Replacement Youtube 2014 silverado 1500 5.3. temperature gauge quit working and fans running after shut off. no other malfunctions that i can see. changed the sensor out, added coolant. check engine light is on (constant) and temp gauge still not reading. took it to have codes cleared but there were no codes. i was told to drive it for 50 100 miles and the system. The chart lists the resistance values in ohms (Ω) for a given temperature range. for example, at 32°f, the resistance value for a typical gm coolant temp sensor is around 9,600 Ω. at 212°f, the resistance value drops to around 185 Ω. to use the chart, you need to measure the resistance of the coolant temp sensor using a multimeter.
How To Replace Engine Coolant Temp Sensor In this video i will show you how to change the coolant temperature sensor on a 2016 chevrolet suburban. how to change thermostat youtu.be wvbzcpu3hy4. Step 7: remove electronic harness from the temperature sensor. the first thing is to remove the electronic harness that connects to the sensor. typically this sensor is attached with a plastic clip. to remove the clip, take a flat head screwdriver and slowly pry the clip from the outside edge of the temperature sensor. Here is a more detailed list of the signs of a bad or failing coolant temperature sensor to look for: 1. check engine light. one of the first signs of all coolant temperature sensor symptoms you will probably notice is that the check engine light will show up on your dashboard. if the computer detects any problem with the sensor’s circuit, it. Firmly grasp the electrical connector and gently push it back onto the coolant sensor until you hear an audible click signaling the complete installation of the connector. 6. refill the cooling system. once the sensor installation is complete, close the radiator drain valve and refill the system with coolant.
Comments are closed.