6 0 Liter Powerstroke Turbo Intake Oil Cooler Removal Youtube In the last video, we disassembled the oil cooler out of this 6.0. now, we're putting the new one back together so we can put it back in the truck. That way when you take the four bolts out for the oil filter housing, you can fish the wires out of the way and forward. get the housing out, filter still in. next the standpipe, one small bolt, then twist it, get it out of the way. i believe i pulled the turbo feed line next, to get the wires out of the way.
6 0 Powerstroke Oil Cooler Replacement Part 2 Youtub Ford 6.0l powerstrokes have a fatal problem: the engine oil cooler. in this video i will show you what the oil cooler looks like, where it is located, and co. Some engines, like the 6.0 power stroke, take this a step further by adding a cooler to extract heat directly from the oil. while the 6.0’s oil cooler is effective, it also has a history of pattern failures. these problems can be addressed by installing a 6.0 oil cooler relocation kit or a complete 6.0 power stroke oil cooler upgrade. common. It really depends on your my truck, for example my truck as an 05 had issues with the snap to connect fitting on the hpop, my oil feed line there is an update, the turbo drain there is an update. my aside you'll need. 1 intake gaskets with front cover o ring. 2 fuel housing o ring kit. 3 oil filter. Tighten to 10 nm (89 lb in). if necessary, install the lower oil pan. for additional information, refer to oil pan — lower in this section. note: remove the plugs or caps from the openings. connect the oil cooler outlet hose at the lower radiator hose outlet. connect the coolant hose retainers to the upper oil pan.
Comments are closed.